How to change router IP address | How to find my IP | Step by step guide

An Internet Protocol address (IP address) is a logical numeric address that is assigned to every single computer, printer, switch, router or any other device that is part of a TCP/IP-based network. how to change router ip address.

How to change router IP address

The IP address is the core component on which the networking architecture is built; no network exists without it. An IP address is a logical address that is used to uniquely identify every node in the network. Because IP addresses are logical, they can change. They are similar to addresses in a town or city because the IP address gives the network node an address so that it can communicate with other nodes or networks, just like mail is sent to friends and relatives. here i’ll teach you about How to change router IP address.

The numerals in an IP address are divided into 2 parts:

  • The network part specifies which networks this address belongs to and
  • The host part further pinpoints the exact location.

What is an IP Address

An IP address is the most significant and important component in the networking phenomena that binds the World Wide Web together. The IP address is a numeric address assigned to every unique instance that is connected to any computer communication network using the TCP/IP communication protocols.

How to change router IP address

Network nodes are assigned IP addresses by the Dynamic Host Configuration Protocol server as soon as the nodes connect to a network. DHCP assigns IP addresses using a pool of available addresses which are part of the whole addressing scheme. Though DHCP only provides addresses that are not static, many machines reserve static IP addresses that are assigned to that entity forever and cannot be used again.

IP addresses falls into two types:

  • Classfull IP addressing is a legacy scheme which divides the whole IP address pools into 5 distinct classes—A, B, C, D and E.
  • Classless IP addressing has an arbitrary length of the prefixes.


    1. Press the Windows Start key to open the Start screen.
    2. Type cmd and press Enter to launch the command prompt.
      • Note: You do not need to click on anything on the Start screen – typing will automatically initiate a program search.

Type CMD to search for command prompt

    1. Type ipconfig /all at the command prompt to check the network card settings.

      ipconfig /all

    2. The MAC address and IP address are listed under the appropriate adapter as Physical Address and IPv4 Address.ipconfig results
    3. You can copy the Physical Address and IPv4 Address from the command prompt by right clicking in the command prompt and clicking Mark.

Right click > mark

    1. Select the text you want to copy with the mouse and hit the Enter key to copy it. You should now be able to paste the text elsewhere using the standard clipboard “paste” function.

Select physical address

How to change router IP address

Modem users

When connecting to the Internet over a dial-up Modem, your ISP will assign your computer a different IP address each time you connect. If you’re wanting to change your IP address, try disconnecting and reconnecting. If you’re assigned the same address, disconnect for a few minutes and then reconnect.

Broadband users

Broadband service providers will assign your computer or home network a static IPaddress. If you’re connected to a broadband network and need to change your IP address try following the steps below.

Disconnect power to broadband modem, How to change router IP address

Getting a new IP address may be as simple as disconnecting the power to your broadband modem. Disconnect the power from the modem and leave it disconnected for a few minutes. If you have a network router connected to the modem, we also suggest disconnecting the power to the router.

Release the IP address assigned to router

[su_posts template=”templates/list-loop.php” posts_per_page=”2″]

If disconnecting the power to the modem and router did not work, it may still be saved in your router configuration. Try releasing and renewing the Internet IP Address for the router. Steps on how to do this can vary depending on the router. However, is often done through the Status or setup in the router setup.

Leave it disconnected over night

If the above two suggestions do not work, disconnect the power to the modem and router (if applicable) and leave them disconnected overnight or for as long as possible.

Contact the ISP

If none of the above suggestions help you change your IP address, it’s possible your ISPprevents a new IP address from being assigned unless it is abandoned for days. In this situation, its usually easiest to contact the ISP to get the IP address changed. How to change router IP address

Changing your home network IP address

To change or specify the IP address of your computer as it appears on your local area network (LAN), follow the steps below. Keep in mind that if you’re connecting to the Internet with a broadband connection, adjusting your network settings may cause issues with your broadband connection. Finally, if your home network is setup through a network router, that router could be assigning your computer dynamic IP addresses, and specifying a static IP address may cause issues.

Windows Vista and later

  1. Open the Control Panel.
  2. Click on the Network and Sharing Center icon.
  3. In the View your active networks section, click the Local Area Connection or Ethernet link, or click the Internet connection name next to Connections.
  4. On the Local Area Connection or Ethernet Status window, click the Propertiesbutton.
  5. In the Properties window, select the Internet Protocol Version 6 (TCP/IPv6) or Internet Protocol Version 4 (TCP/IPv4) connection and click the Properties button. The connection you select depends on the type of Internet protocol in use for your Internet or Network connection.
  6. In the Internet Protocol properties window, select the Use the following IP address option if not already selected. Specify the new IP address you want to use. You also need to specify the subnet mask and default gateway.

Windows XP and earlier

  1. Open the Control Panel.
  2. Right-click on My Network Places or Network Neighborhood and select Properties.
  3. Right-click on Local Area Connection and select Properties.
  4. Click Internet Protocol (TCP/IP) and click the Properties button. If this is not present, you’ll need to install the Internet Protocol (TCP/IP) protocol.
  5. In the Internet Protocol (TCP/IP) Properties window, select the Use the following IP address option if not already selected and specify the new IP address you want to use. You also need to specify the subnet mask and default gateway.

Windows command prompt, How to change router IP address

You can change a computer’s IP address through the command prompt by following the steps below.

  1. Access the Windows command prompt interface.
  2. Type netsh to start the Netsh utility.
  3. To change the IP address, you will need to specify not only the new IP address, but also the Subnet Mask and Default Gateway. Use the command structure below.

interface ip set address name=”[connection name]” static [IP address] [Subnet Mask] [Default Gateway]

In the above command structure, replace [connection name] with the name of the network connection for which you want to set the new IP address. The most common network connection names are “Local Area Connection” or “Wi-Fi”. Replace [IP Address] with the new IP address you want to use, then replace [Subnet Mask] with the correct subnet mask address and [Default Gateway] with the correct default gateway address.

interface ip set address name=”Local Area Connection” static

The above example command would change the IP Address of the Local Area Connection network connection to It would also set the Subnet Mask to and the Default Gateway to

Linux users

The below information is for how to specify and adjust your network settings through the command prompt. Changing your network settings will require root access.

  1. Get to the shell.
  2. Move to the /etc/sysconfig/network directory.
  3. Edit the interfaces file and adjust your network settings in this file.

In the Simple way

Step 1: Open a web browser and type the IP address of you router into the address bar (The Default IP address is
Step 2: The default username is admin and the password is blank (nothing). Click on Log In.

Step 3: Click on Setup > Network Settings 

Step 4: Under Router Settings, type in the router´s new IP address and  subnet mask. The IP Address that is configured here is the IP Address that you use to access the Web-based management interface. If you change the IP Address here, you may need to adjust your PC´s network settings to access the network again. (You can do this by disconnecting and reconnecting to the network)

Step 5: Click on Save Settings

Can someone else change my IP address?

Someone who’s outside your home network and does not have access to your network router cannot change your IP address. Do not be concerned about your computer’s security if your IP address has changed. It’s more likely that it’s normal behavior than an attack.

How to change router IP address

Sharing is Caring:


Add a Comment

Your email address will not be published. Required fields are marked *